How to install and configure sangoma card on Asterisk, Freepbx based pbx 1. If you are using the precompiled iso’s of asterisks pbx then by default the wanpipe will be installed. “wanpipe is the driver for the sangoma cards” 2.

If the wanpipe is not installed you need to install the latest wanpipe 3. Installing the wanpipe in centos installing the dependicies yum -y install kernel-devel-$(uname -r) libtool* gcc make patch perl bison gcc-c++ ncurses-devel flex libtermcap-devel autoconf* automake* 4. Donwload the latest wanpipe from below link 5. Untar the wanpipe file tar xvfz wanpipe.tgz 6.

When you log into the DAHDI module in FreePBX the first time. But if any changes you would normally make to DAHDI configs are needed. (T1 or analog) into. Be careful if you have UNISTIM doing this upgrade. Ks16alt install which gives 2.5.2.2 of Freepbx and Asterisk 1.6.2.6 and Centos 5.2. Jan 15, 2015 FreePBX 6.12.65 Asterisk 13 To contact Chris, pl. FreePBX 101 - Part 1 - Installation (updated video). Raspberry PI to PBX Basic Install. I can not get the phone to register to asterisk. Which of course has to do with the fact that in the unistim.conf file seems to have something wrong.

Cd wanpipe- 7. Type./Setup dahdi 8.

If it prompts yes just press y and enter 9. Proceed with Defaults for the rest of the compilation Once wanpipe installation done, now you need to configure your sangoma card 1. Type lspci command to check whether your server have recognizied the sangoma card the above command will return sometink like below “Sangoma Technologies Corp.

A200/Remora FXO/FXS Analog AFT card” 2. Now type wancfg_dahdi would you like to generate /etc/asterisk/chan_dahdi.conf 1. NO [1-2]:1 Configuring port 1 on A101 slot:4 bus:4.

———————————————————– Select media type for AFT-A101 on port 1 [slot:4 bus:4 span:1] 1. Exit [1-4]:2 ——- if your connection is T1 then enter 1 mine is E1 (egypt) Configuring port 1 on 101 as E1, line coding:HDB3, framing:CRC4 1. Free Reinforced Concrete Design Handbook. YES – Keep these settings 2.

NO – Configure line coding and framing [1-2, ENTER=’YES’]:1 note: for the above you need to ask your provider for the detaisl like crc4 is enable to disable based on that u need to enter Select clock for AFT-A101 on port 1 [slot:4 bus:4 span:1] 1. MASTER [1-2]:2 Select signalling type for AFT-A101 on port 1 [slot:4 bus:4 span:1] 1.