If you have no red light on the front then I would say it is most definitely a power board issue. However, if you still have the red light it could be a power board or main AV board issue - that's the one with all the video inputs in. Both of these are probably available quite cheaply on eBay.

Instructions for a Baird LCD1. Connect your Baird LCD television set's power cable to a wall jack. In order to protect your new LCD television from an electrical. Baird 47 inch hd tv model jo47 need a replacement control tried all codes for sky remote still didnt work can - Televison & Video question. There Baird 55 Inch Tv Manual a. Free download and software. From Securenet Compress files with QuickZIP and save a lot of disk space.

You will need to check the part numbers though as often the same TV can use different components. Megascenery Earth New York 0041 more. Please remember to UNPLUG BEFORE OPENING the TV. And DON'T TOUCH the boards in case some static off you shorts anything, but also because capacitors can still hold a charge when unplugged. If you get back to me with the part numbers of your board(s) I will point you in the direction of a seller I trust. Not everybody who sells parts on eBay actually tests the boards you see, despite their claims.

Posted on Jun 19, 2013. • 325 Answers SOURCE: This is a protection circuit that prevents the tv from coming on (to stop damage of the components).you need to check your voltages off the power supply and make sure they all read well (EX: 24v12v5v etc).

Also look for popped capacitors that would make the values lower than need be for the tv to power on properly. Once you repair the power supply then you may need to replace other components if needed (EX: backlight inverter)! Please rate if this helps!:D Replacing capacitors is ALWAYS the cheaper option, but you need to have experience it, or you'll create more damage than good! Posted on May 06, 2011. • 14553 Answers SOURCE: I see so many here with no sound/nopicture issues: ISSUES: 1. IF sound main fuse/s are good.

If no power or standby check main fuse, standby power supply and any signsof damage you can see---burnt parts etc. Almost all these sets the troubleshooting involves voltages on the main power board to narrow down theproblem. Be safe and if you do not know what you are doing don't open the set. Answers to issues: 1. RE:fuses---if a blown fuse is found get a good replacement(not the genericones like Radio Shack). Many fuses are special even aside from amperage--Don'tput a higher rated amperage fuse in the set for any reason. RE: power supply in set: if total dead aside from main fuse the set uses astandby power supply that runs 7/24 and a main supply (some are combined andsome not.