• CMOS network camera Installation instructions TV7203 TV7204. • Preface Dear Customer, Thank you for purchasing this CMOS Network Camera of the DIGI-LAN series from Security-Center. You made the right decision in choosing this state-of-the-art technology, which complies with the current standards of domestic and European regulations. The CE has been proven and all related certifications are available from the manufacturer upon request. • Before using this product The use of surveillance equipment may be forbidden by law in some countries.

Video surveillance software that is comparable with any of. Digi-Lan und Eyseo cameras are listed with the additional. Camera Eyeseo TV7203; New: Camera. DIGI-LAN TV7203; DIGI-LAN TV7204. Camera already can be connected after software installation from Local Area Network. Camera of the DIGI-LAN series from. You for purchasing this CMOS Network Camera of the DIGI-LAN series from Security. Temperature: 0-50 C/32-122 F 802.11g wireless LAN (TV7203 + TV7204) Ambient.

This CMOS network camera is not only high-quality web camera but can also be used as part of a flexible surveillance system. Before using this equipment, make sure that all your surveillance activities are completely legal. • Contents Preface....2 Precautions...2 Before using this product...3 Contents....4 Scope of delivery... 5 Hardware installation...6 First access to CMOS network camera..7 Setting the IP address...7 Access to the network camera via the Internet Explorer.. 12 Defining a password to prevent unauthorised access.. • Scope of delivery CMOS network camera TV7200 / 7201 Antenna (only TV7204) Transformer Camera stand Software CD Installation instructions (on CD) • Hardware installation Make sure that all accessories and articles listed above are present in the scope of delivery.

Depending on application, an Ethernet cable may be required. This Ethernet cable must meet the specifications of UTP Category 5 (CAT 5) and must not be longer than 100 meters. Illuminator Telememo 30 Manual.

• First access to network camera CMOS Setting the IP address To set the IP address of the camera: Use a network cable to connect the CMOS network camera to your computer network. (The simplest way is to connect the CMOS network camera direct to your PC using a cross-link cable.) If your PC is not yet integrated into a network, you first have to configure it for the network application. • The network connection of your PC is now configured. Now start the Installation Wizard from the software CD supplied. Follow the installation instructions of the Installation Wizard.

If installation is successful, start the program under Programs/Installation Wizard. Select one of the camera models found.

Click to enter camera setup mode. If you have to enter a password, use the device serial number (no spaces, uppercase letters only). You can change the hostname, the administrator password and the date/time settings of the camera. If you cannot access the settings, check the IP addresses of your network adapter and your network camera. Now click to change the IP address of your network camera. If you use a router in your network, enter this IP address (gateway) in the Default Router field. For a Cross link connection from the camera to the PC you have to type in an IP address in the same subnet (e.g.

• Press “Skip” to leave the “Wireless setting” unchanged this time. For further information please read chapter “WLAN configuration”. Follow the instructions on the screen to save or change your settings. The Installation Wizard is finished. Adobe Multi Keygen For Register Any Adobe Programs more.

Click to change your settings. Click to save your input and transfer it to the selected device. • Access to the network camera via the Internet Explorer Defining a password to prevent unauthorised access When delivered, no administrator password is defined for the CMOS network camera. The CMOS network camera asks for this number at the start of operation. For security reasons, the administrator should define a new password immediately. • Changing the administrator password Click “Configuration” and then “Security”.